FLOW DOWN REV.

A ZJV 04/22/2019 –

UPDATED TO NEW BHGE TEMPLATE. -REMOVED PARA 2.1.5.4 THROUGH 2.1.5.8 (REDUNDANT INFORMATION IN TABLES 3 THROUGH 8 -PARA 3.0 WAS 2.2 (CHANGED TO MAJOR HEADER) -ADDED NEW PARA 2.1.5.4 THROUGH 2.1.5.6

2.1.5.4 MEASURE AND RECORD THE ACTUAL MACHINED BORE DIAMETER ON THE SHOP ROUTING OR APPROPRIATE QUALITY CONTROL DOCUMENT.

2.1.5.5 RE-ETCH ANY DAMAGED OR REMOVED MARKINGS THAT OCCURED DURING THE DISSASSEMBLY OR REMACHINING OPERATIONS.

2.1.5.6 LOCATE THE P/N ON THE SEAT BUSHING. NEXT TO THE PART NUMBER MARKING, ETCH THE NEW BORE DIAMETER ON THE P/N.