GTC REVISION JUNE 2019

AS043 (F) 05/29/2019 Andrew Roberts Added photos to section 5, 6, 8, 9, 10, 12, 15, 16 to represent tag, cap, and seal position of each valve type listed in those sections. Changed wording throughout the document that discussed impressing the letters “CN” on the seal to “impressing the site’s abbreviation as described in the local Quality Control Manual and accepted by the ASME Designee on the seal.” Added part numbers for tags in Sections 5.4.2.1, 5.5.1.1, 9.4.1.1, 16.3.1.1, and 16.3.2.1. Updated images for Backpressure Rating Tag Plate to latest revision in sections 5.4.2.1, 9.4.1.1, 16.3.1.1, and 16.3.2.1. Added section 5.3.1.5 for wire seal location in raised embossment

AS230 A ZJV 04/22/2019 -UPDATED TO NEW BHGE TEMPLATE. -REMOVED PARA 2.1.5.4 THROUGH 2.1.5.8 (REDUNDANT INFORMATION IN TABLES 3 THROUGH 8 -PARA 3.0 WAS 2.2 (CHANGED TO MAJOR HEADER) -ADDED NEW PARA 2.1.5.4 THROUGH 2.1.5.6

EG112B D 4/11/2019 KEL ON TABLE 8 BASE AND BONNET MTL SA216 GRADE LCC WAS WCC; BOTTOM OF PAGE 29 NOTE LCC MTL WAS WCC MTL