On-Site Machining
Click images to enlarge
The On-Site Machining Department of Chalmers & Kubeck provides on-site evaluation of repairs, field machining, laser alignment, balancing, lineboring, engineering, etc.
Overview
- Engineering Services
- Reverse Engineering
- In- House Balancing up to 5000 Lb.*
- Metal Stitching and Crack Repair
- Line Boring
- Troubleshooting
- Vibration Analysis
- Laser Alignment
- Metal Spray
- Mobile Machine Shop Trailer
- Specialty Machines can be made for many applications
Capabilities
Flange Facing
- To 60" Ø
- Several Machines Available
- Some I.D. Mount -Longer Sizes
- Some O.D. Mount - Smaller Sizes
Line Boring
- To 60" Ø
- To 12 ft. length
- Hydraulic Drives
- Pneumatic Drives
Milling Machine
- Up to 11ft. single set-up
- 18" wide single set-up
- Precision Leveling
- Hydraulic Drive
End Shaft Lathes
- Up to 24" Ø
- Up to 30" reach
- Several Machines Available
Valve Machining
- Several Smaller machines adaptable to many kinds and sizes of valves for :
- Seat Work
- Guide Work
- Pressure Seal Work
Many other specialty machines
Locations
On Site Machining is available at all eight facilities. Look below for the location nearest you.
| Description | Phone | Fax | |
| Aston, PA | |||
| Galinas, Dave | 610-494-4300 | 610-485-1484 | |
| Reese, Don | 610-494-4300 | 610-485-1484 | |
| Watkinsville, GA | |||
| Weiland, Charles - General Manager | 706-769-6660 | 706-769-1150 | |
| Westfield, MA | |||
| McCoy, Scott - Manager | 413-568-2461 | 413-568-2461 | |
| New Brunswick, NJ | |||
| Salvi, Wayne - Sales | 732-828-4813 | 732-828-1130 | |
| Lynchburg, VA | |||
| Beasley, Neal - General Manager | 804-846-3382 | 804-846-3383 | |
| Charlotte, NC | |||
| Curless, Greg - General Manager | 704-333-3786 | 704-334-1872 | |
| Cayce, SC | |||
| Sharpe, Steve - General Manager | 803-791-6012 | 803-791-6018 | |
| Chattanooga, TN | |||
| Staggs, Linda - General Manager | 423-266-0630 | 423-267-5512 |
