Metalizing is a process in which a wire or powder is heated
to its melting point and the molten metal is sprayed by compressed air to form a protective coating. The Metalizing Department at Chalmers & Kubeck, Inc has 5 employees who have 30+ years of experience in metal spraying and thermal spraying. Chalmers & Kubeck, Inc. specializes in full-service metalizing, Grinding, and Super Finishing with Field Capability available.
Types of Guns:
Taffa 3088 Arc Gun: Corrosion, Wear Resistance.
Metco 7 MC Plasma Unit: Ceramics, Stainless, Abbradable Coatings.
Metco HVOF (High Velocity Oxygen Fuel): Tungsten Carbides, Bearing Diameters, Turbines and High Speed Gearing
Metco Combustion Spitter (Thermal): Corrosion, Wear Resistance.
Metalizing Capabilities:
Aluminum, Babbitt, Protective Coatings, Shaft Repair, Bore Repair, mild steel, stainless steel, ceramics, and Tungsten Carbine
Note: All Wires and Powders are certified
Examples of Areas Where Metalizing is Used:
Pumps – Shafts, Impellers, Bore, Resurfacing, Rotating Pump Elements, Bearing Journals, Turbines, Impellers, Babbitt Bearings, & Pistons.
Gear Boxes – High Speed Gearing, Shafts, Babbitt Bearings, Bearing and Seal Diameters.
Valves – Valve Stems and aluminizing springs
Contact Information for thermal spraying and metal spraying near Philadelphia
Joe Antonelli - Department Manager
Phone (610)-494-4300
Fax (610)-485-1484
