|
|
| CNC
Manufacturing |
|
|
 |
|
Click to Enlarge |
| The Manufacturing Division of Chalmers & Kubeck in
Aston, Pa is a full-service manufacturing facility with
small and large capacity CNC machines. Milling capacity
up to 13 feet x 30 feet. Vertical boring mill capacity
up to 32 feet with 10 feet under the rail. Chalmers & Kubecks
comprehensive range of close tolerance machining
ensure finished products that meet the most
demanding specifications |
|
Overview
|
- NEW FOR 2005
Kitamura Machining Center with 5 Axis and Palletizer
- Computer modeling and virtual machining with
Unigraphics. AutoCAD and CADCAM Capabilities
- Lathes with turning capacity up to 32" dia.
x 17' between centers.
- CNC Vertical Boring Mills with capacity up to 32'
in. dia. x 10' under rail.
- CNC Horizontal Mills with the capacity for machining
up to 13' x 30' long.
- Small machining capabilities including CNC Machining
Centers.
|
|
Kitamura
- Mycenter HX630i
|
| Kitamura Mycenter
HX 360 i has been customized with a 5 Axis
Rotary Table, a Laser Tool Probe, and a Renishaw
Part and Inspection Probe. |
|
| Table Size
630 x 630mm (24.8" x 24.8") |
Tool Storage Capacity
50 pcs. |
Travel (X,Y,Z)
1000 x 800 x 820 mm
(39.4" x 31.5" x 32.3") |
Tool Change Time (T-T/C-C) 1.5
sec/5.5 sec |
| Spindle taper
NT No. 50 |
Rapid feed (X x Y x Z)
50m/min (1,969ipm) |
| Spindle Speed
35-12,000 min-1 |
Power Requirement
55KVA |
|
|
Romer
3000i Series
|
| The 12
foot portable 3000i arm is well suited for
tight-tolerance inspection, measuring and
reverse engineering work in the aerospace,
automotive, off-road, agricultural equipment and
similar industries. |
 |
|
|
Machining Capabilities |
| Type |
Qty |
Maximum Capacity |
| Horizontal Boring Mills |
8 |
Table Size: 59 " wide
by 79" long, with head travel of 72" high, 5"
diameter spindle |
| CNC Horizontal Boring
Mill (4-Axis) |
1 |
Table Size: 98" square,
rotary, 154" travel with head travel of 115" high |
| Mill (4-Axis) |
1 |
Table Size: 87" x 71",
rotary, 138" travel with head travel of 98" high |
| CNC Floor Type
Horizontal (5-Axis) Boring Mill |
1 |
Horizontal travel of 30
feet Head travel of 98" Rotary table 80" x 98" |
| CNC Floor Type
Horizontal |
1 |
Horizontal travel of 30
feet (5-Axis)
Boring Mill Head travel of 156"
Rotary table 144" squire |
| |
| Locations
/ Contacts |
CNC Manufacturing is only available at the Aston, Pa facility.
|
|
|
| | | |
- Engineering Services
- Limitorque Operators
