CNC Manufacturing

The Manufacturing Division of Chalmers & Kubeck in Aston, Pa is a full-service manufacturing facility with small and large capacity CNC machines. Milling capacity up to 13 feet x 30 feet.  Vertical boring mill capacity up to 32 feet with 10 feet under the rail. Chalmers & Kubecks comprehensive range of close tolerance machining ensure finished products that meet the most demanding specifications

 Overview
  • NEW FOR 2005 Kitamura Machining Center with 5 Axis and Palletizer
     
  • Computer modeling and virtual machining with Unigraphics. AutoCAD and CADCAM Capabilities
     
  • Lathes with turning capacity up to 32" dia. x 17' between centers.
  • CNC Vertical Boring Mills with capacity up to 32' in. dia. x 10' under rail.
  • CNC Horizontal Mills with the capacity for machining up to 13' x 30' long.
  • Small machining capabilities including CNC Machining Centers.
 Kitamura - Mycenter HX630i
Kitamura Mycenter HX 360 i has been customized with a 5 Axis Rotary Table, a Laser Tool Probe, and a Renishaw Part and Inspection Probe.
 
Table Size     630 x 630mm (24.8" x 24.8") Tool Storage Capacity     50 pcs.
Travel (X,Y,Z)    1000 x 800 x 820 mm
                         (39.4" x 31.5" x 32.3")		 Tool Change Time (T-T/C-C) 1.5 sec/5.5 sec
Spindle taper    NT No. 50 Rapid feed (X x Y x Z)  50m/min (1,969ipm)
Spindle Speed   35-12,000 min-1 Power Requirement     55KVA
 Romer 3000i Series
The 12 foot portable 3000i arm is well suited for tight-tolerance inspection, measuring and reverse engineering work in the aerospace, automotive, off-road, agricultural equipment and similar industries.

Machining Capabilities
Type Qty Maximum Capacity
Horizontal Boring Mills 8 Table Size: 59 " wide by 79" long, with head travel of 72" high, 5" diameter spindle
CNC Horizontal Boring Mill (4-Axis) 1 Table Size: 98" square, rotary, 154" travel with head travel of 115" high
Mill (4-Axis) 1 Table Size: 87" x 71", rotary, 138" travel with head travel of 98" high
CNC Floor Type Horizontal (5-Axis) Boring Mill 1 Horizontal travel of 30 feet Head travel of 98" Rotary table 80" x 98"
CNC Floor Type Horizontal 1 Horizontal travel of 30 feet (5-Axis)
Boring Mill Head travel of 156"
Rotary table 144" squire

 CNC Manufacturing is only available at the Aston, Pa facility.

Locations / Contacts:

Aston, PA

Dupont, Kevin

Reeser, Rick

Phone

610-494-4300

 610-357-6977