 - CNC Manufacturing - Engineering Services - Gear Mfg. & Repair - Maintenance Machining - Pumps, Turbines, Etc. - Valve Service & Repair - Welding & Fabrication 
- Engineering Services- Borescope Program - Gear Service & Repair - On-Site Machining - Valve Service & Repair - Welding & Fabrication 
- Limitorque Operators- MOD 2000™ Controller - Dresser Valves - Pressure Vessels - Gear Boxes - Clark-Reliance 
|
Chalmers & Kubeck has your solution that could save you costly down time or even save unnecessary disassembly with our state of the art technology. C&K can access the gears and bearing to examine their condition without removing or disassembling the unit. With our borescope program, we can do an on-site inspection of your gearbox. The equipment that Chalmers & Kubeck uses is similar to the equipment used in the medical field. All C&K needs is access as small as 3/4" to enter the unit. With the articulating camera head, we can look at the components of the bearing, checking for wear, pitting or thrust load. (See sample borescope report) With Chalmers & Kubeck's Borescope program, we have found clogged lube spray nozzles, no clearance bearings, etc. We check oil troughs for contamination of metal, brass, dirt, etc. Our monitoring program takes photos from prior inspections and compares them to the most recent photos to supervise whether there was any wear on the gears and bearings. Our findings have saved our customers thousands dollars in repairs and down time. Also, C&K's inspections are not limited to gear boxes. We can inspect and measure turbine blades with our stereo tip measuring lens. We can use this feature to monitor wear on the fins. We have been called to find lost objects inside
equipment that could enter the equipment causing thousands of
dollars in damage. Our technicians are highly qualified to perform
on-site inspections and advise on the spot any repairs or
precautions that need to be performed.
|
|||||||||||||||||||||||||||
